Archives: Products

Uncategorised

Thermal imaging cameras

FLIR Systems has released three new FLIR i-Series thermal imaging cameras – the i40, i50, and i60.

According to the company, the affordable i-Series cameras offer best-in-class infrared diagnostic capabilities for commercial applications.

The i-Series cameras support electromechanical applications and will occupy the segment of the market between the new, high volume FLIR i5 camera and the higher performance T-Series range.

The new cameras are said to set new benchmarks in temperature measurement and accuracy because of the adjustable emissivity feature built into the i-Series cameras and thermal sensitivity better than 0.1°C.

This ability to adjust for emissivity and reflectivity seen in objects such as shiny metal, plastics, wood and many other industrial environments provides for true accuracy in temperature measurements.

Flir Systems Australia 03 9550 2800, www.flir.com.au.

0 33
Uncategorised

Variable frequency drive (VFD)

IMPROVED motor control and a simple plug-and-play philosophy for three-phase AC motor control is said to be one of many important benefits of WEG Australia’s local launch of the CFW-11 variable frequency drive (VFD).

Initially available to 88A with a second tier rated to 211A “on the water” and due for local delivery shortly, the CFW11 is described by the company as an exciting step that will benefit Australian users, technically, commercially and also environmentally.

All CFW11 Series feature a twin rating to allow the customer to select the product based on their machine installation demand and required overload ratings.

The drives have a 50°C Ambient temperature rating as standard and an IP54 rated heat-sink for feed-trough cabinet mounting.

The CFW11 has an internal RFI Filter and also feature built in DC inductors to meet EN standards for harmonic mitigation without additional external reactance devices.

Low energy consumption and high efficiency together with RoHS compliance give the product a minimal environmental impact.

WEG Australia 03 9765 4600, sean.richardson@weg.com.au.

0 44
Uncategorised

Confined space/fall arrest safety systems

SPERIAN Protection has available the Miller DuraHoist confined space and fall arrest systems. A recent addition to the range includes a range of extensions to the existing mast system.

Four new lower mast extensions offer additional height options and flexibility, allowing users to accommodate a variety of different overhead clearance applications and uses.

Another component recently added is the DH-AP12, a specific bolt on base for the fall arrest posts.

This new base is said to provide added safety and will increase the strength for all models.

Two new flush floor mount plate sleeves are now also available to complement the range and come in either stainless steel or zinc-plated steel.

These new additions sit alongside other products that were launched earlier in the year; the Four Piece DuraHoist System, a modular design for confined space allowing the use of components in various configurations and applications, the DuraHoist One Piece Adjustable Mast designed for use where multiple offset masts are required, the DuraHoist Three Piece Portable Base which features adjustable aluminium screws and a built-in level indicator for easy set-up on un-even surfaces, and the Miller DuraHoist Portable Fall Arrest Anchor Post designed for use on top of transformers or other types of vertical platforms.

Sperian Protection 1300 139 166, www.millerfallprotection.com.au.

0 29
Uncategorised

Punch press for a range of applications

SYDNEY-based machine supplier Power Machinery has released the Pullmax Pullmatic Punch Press, offering a world of new applications for a tried and tested system.

The punching system can punch, form, bend up to 75 mm high, mark, tap and cut — all in just one cycle.

Each tool rotates up to 360° and if required and can be supplied with automated material handling which allows for unmanned production 24 hours a day, 7 days a week.

The 20-station rotating tool magazine can also hold up to 200 tools. By using the tools system, 10 smaller punches can also fit into each station.

The maximum forming height of 75 mm is three times higher than other punching machines. Bending can take place in a variety of angles, even on parts that are not located in 0° or 90° on the sheet.

A single punch head enables full auto-indexing of all tools to 360°. Parts can be rotated in any direction and positioned on the work piece and it is possible to utilise each tool on any area of the sheet, even close to the perimeter.

For more information contact:

Power Machinery

P – 02 9971 1755

0 43
Uncategorised

Long life lube oil filters

DONALDSON Australasia has released the new P559000 and P553000 oil filters specifically designed for Cummins engine applications.

The filters have been engineered to hold more contaminants than the original equipment oil filter, thereby extending filter life and allowing the engine to run longer without a filter change.

Advanced filter media developed by Donaldson is said to be the key ingrediant to delivering this higher efficiency engine protection, with the Synteq filter media preventing more contaminants from passing through.

According to the company, at flow rates of 150 lpm and 105 lpm respectively, tests (ISO 4548/12) have shown the P559000 is over 30% more efficient than other leading filter brands.

Additional features include: a unique wide-mouth cartridge outflow that allows unobstructed oil flow from the filter media, consistently delivering the maximum flow available; multi-density filter media to hold more contaminants and; superior filter cartridge design that permits 40% more full-flow surface area and therefore, the engine oil continually receives high-efficiency filtration.

For more information contact:

Donaldson Australasia

P – 02 4350 2000

0 26
Uncategorised

Simplex launches new technology at Fire Australia

SIMPLEX Fire Products have launched the brand new Vigilant Mx 1 fire detection and alarm system at this year’s Fire Australia conference and exhibition held in Sydney last October.

As the newest addition to the MX Technology range, the fire detection and alarm system offers an innovative one or two loop analogue addressable fire indicator panel incorporating the latest fire detection technology from around the world.

Designed for compliance with Australian Standards AS 7240.2 and featuring an integral Fire Brigade Panel to AS 4428.3, the system is said to be suitable for an extensive range of fire protection applications for small to medium size systems.

The system utilises analogue addresable detection with a range of multi-sensor detectors. An example of this is a triple sensor detector incorporating photoelectric smoke, carbon monoxide and heat. This permits the selection of algorithms for appropriate detection combined with high nuisance alarm immunity, in order for the best detection mode for a situation to be easily chosen.

For further information contact:

Simplex Fire Products

P – 1300 552 559

W – www.simplexfire.com.au

0 31
Uncategorised

New range of granulators

GERMAN company Neue Herbold, producers of size reduction machinery such as granulators (pipe and profile), grinders, pulverisers etc has expanded its range of granulator equipment.

The SM Granulator is a heavy duty granulator range, which can process large headwaste lumps and purgings, massive profiles, thick walled pipes and other extreme wall thickness items.

Options are also available to enable the machine to handle larger hollow parts, such as containers, drums and crates.

The range of granulators are designed with true ‘double cross cutting action’ of oppositely inclined rotor and stator blades.

The cutting geometry is said to ensure a precise cutting gap over the complete blade length thus giving lower power, noise and fine characteristics.

All blades, rotor and stator, are pre-adjusted outside the machine in a supplied setting jig. The bearings are mounted outboard of the granulator chamber ensuring no cross ingress of grease, heat or material fines.

Additional features include: low noise level due to the characteristics of the double cross cut action; lower power consumption; reduced downtime for blade changing due to preset blade features and ergonomic design; fully accessible machines for easy cleaning and; compact layout for minimum space requirements.

For more information contact:

HBM Plastics Technologies

Gary Brown

P – 02 8814 3100

E – gary@hbm.com.au

0 20
Uncategorised

Coating thickness measurement with Digital Technology

INTELLIGENT sensors with integrated digital signal processing are becoming the trend in an increasing number of applications.

There are considerable and valuable advantages due to the interference immunity resulting in higher repeatability, durability and reliability.

ElektroPhysik, through its Australian distributor SI Instruments, has recently released the MiniTest 700 range of Digital Coating Thickness Gauges featuring Sensor-Integrated-Digital-Signal Processing (SIDSP) technology.

Digital sensors for coating thickness measurement based on the magnetic-induction or eddy currents principle combine the complete signal creation, measuring and processing unit inside the sensor.

The sensor is able to create all necessary control signals and to edit and process the return measuring signals digitally inside the sensor.

Only the completely processed, digital coating thickness values are transferred to the coating thickness gauge for display, statistical evaluation and storage. The gauge no longer is used for processing the individual coating thickness values; it merely hosts and manages data, displays the data and exports it.

The sensors have been designed to only require two simple analog modules that can be implemented compactly: a driver amplifier for controlling the sensor head and a measuring amplifier to amplify the measuring signal delivered by the measuring head.

One single operating voltage is sufficient. Embedded in an advanced microcomputer, the analog-to digital converters immediately create and process the alternating voltage signals required for measurement. The entire measurement is processed at the point of measurement, not in the host gauge.

For more information contact:

SI Instruments

P – 08 8352 5511

W – http://si-instruments.com

0 29
Uncategorised

New line of respirators offer a breath of fresh air

PERSONAL safety equipment and air purifying respirator specialist Sperian Protection, is proud to introduce the new Survivair Opti-Fit with mesh headnet.

Said to be an expansion to the popular Survivair Opti-Fit APR full facepiece line, the new Opti-Fit line offers a wide range of features for ultimate performance and added comfort normally found on more expensive respirators.

Featuring a replaceable lens treated with an anti-scratching coating; a nose cup as standard; and a durable silicone skirt, the Opti-Fit is easy to maintain and service, while the wide viewing area offers optimum clarity with distortion free viewing for added safety.

With straps attached to the rim of the facepiece, the Opti-Fit also reduces pressure points and distortion of the sealing surface when tightened. For that extra personal comfort, the new range offers wearers an industrial mesh hairnet to replace the traditional five-point strap.

With less straps and buckles to adjust, the mesh headnet model has been designed to eliminate hair pull and does not leave indentation marks- making it ideal for those with thick hair or who are bald.

It can be also be retro fitted to convert any existing Opti-Fit APRs and is competitively priced for those wanting a mesh headnet option for industrial applications.

Available in three sizes to suit any facial type, the mesh headnet is the perfect solution to those who require full face respirator protection but do not want to compromise on comfort and safety.

For more information contact:

Sperian Protection

P – 1300 139 166

W – www.sperianprotection.com.au.

0 25
Uncategorised

Mini chip vacuum cleans up

EXAIR’s new Mini Chip Vac System has been designed to be a compact, powerful vacuum for chips and other dry materials.

It can be used to clean chips from fixtures, floors and work surfaces of machining centres, lathes, saws, mills and other industrial equipment.

The compressed air powered chip vacuum system creates a powerful cyclonic action that effectively vacuums metal, wood or plastic chips into the included 5 gallon container. Dusty materials such as absorbents are trapped by the 0.1 micron filter bag to keep the surrounding air clean.

The System includes a shutoff valve, filter bag, 5 gallon container with lid and locking ring, 3 metres flexible vacuum hose, aluminium chip wand, two extension wands, crevice tool, brush, skimmer and floor tool.

Other models that attach to an open top 205 litre drum are available.

For more information contact:

Compressed Air Australia

T – 1300 787 688

E – jlindsay@winshop.com.au

0 29
Uncategorised

A sound stop to industrial noise issues

OPTIMUM Handling Solutions has developed a new quick change feature for adjusting the load capacity of their heavy duty scissor lift spring table.

According to the company, within 60 seconds, one man can change the springs, and have the pallet elevator ready for use on a product of a different weight. No tools are required.

Standard load variations are 250kg, 350kg, 500kg, 600kg, 700kg, 850kg, 950 kg and 1200kg. Also load variation of up to 2000kg is available on the standard unit.

The quick change feature is especially valuable when different shifts are packing product of a different weight.

Special options are also available for particular industries, for example a food safe Poly Coat finish that does not chip or flake off, also Galvanised/Stainless steel surfaces that may be required for special applications.

Another feature that sets the Pal – Evator® apart, is its solid steel heavy duty turntable which eliminates the possibility of entrapment of foreign objects or debris, while in operation.

For more information contact:

Optimum Handling Solutions

P – 1800 066 008

E – sales@optimumgroup.com.au

0 32
Uncategorised

Bus coupler with Profinet interface

LUMBERG Automation has developed a new bus coupler with PROFINET interface for the modular, decentralised LioN-Link system.

This bus coupler has an integrated switch which enables PROFINET network wiring in PROFIBUS network line topology.

In addition there is an integrated web server which can be activated via a standard TCP/IP connection. Via this connection information can be called up and settings can be made using a standard web browser: in addition to calling up device information it is possible to set IP addresses directly.

Furthermore diagnostics data of the connected LioN-Link I/O module are displayed as well as status information. The integration of a monitoring function makes it possible to monitor the sensors and actuators connected to the I/O modules.

For further information please contact:

Soanar

W – www.soanar.com

0 25
Uncategorised

New rod locks hit the market

NEXEN has released new rod locks designed specifically for machinists looking for a better rod locking solution for pneumatic cylinders and stand alone guide rod applications.

With their compact dimensions, high holding forces, durability, low backlash, IP67 and NEMA 4X ratings how do you improve on them?

How about adding a manual release and the ability to provide feedback on their locked/unlocked status (optional)! The Rod Locks are spring-engaged, air released, but feature the ability to release manually.

No special tools are required for manual disengagement, just a standard size hex wrench to turn the cam operated release mechanism.

Additional features include: manual release with standard hex wrench or socket wrench; ability to add a internal magnet and non-contact sensor to provide locking mode feedback; compact dimensions and a profile that matches the end of the pneumatic cylinder; rod lock rated for 1,000,000 static locking cycles; no rod displacement on engagement or disengagement; large rod clamping surface minimizes rod and; lock wear fast response time

For more information contact:

Norman G. Clark

www.ngclark.com.au

0 29
Uncategorised

3D printing technology now on your desktop

THE new Alarisä30 Desktop 3D Printer has been designed to offer the unique combination of high quality and high speed in an office-friendly system.

The print heads synchronously jet identical amounts of materials onto the tray, resulting in accurate models with smooth surfaces.

The geometry of the support structure enables complicated geometries, such as cavities, overhangs, undercuts, delicate features, and thin-walled sections.

When the build is finished, the support material is easily removed by water jetting or by hand, and the model is ready for use.

The 300 x 200 x 150mm build tray of the Alarisä30 enables large models or many small parts to be built simultaneously, saving time and cost.

The Alarisä30 operates as a network printer, so multiple designers in the office can send their files to be printed.

The Alarisä30 is small and lightweight enough to fit in any office, on a desk or on the stand that Objet offers with the printer. It uses sealed 1kg bottles of resins and the printed models are fully cured on the build tray, so there is no need for special plumbing or ventilation. The new desktop 3D printer is offered in Australia and New Zealand by XYZ Innovation.

For more information contact:

XYZ Innovation

www.xyzinnovation.com.au

0 27
Uncategorised

Outdoor range of telecom products

HARTING has extended the Han® Connector product range, with the integration of the standard LC fibre optic connectors now in single mode and multi mode to meet the demands set by harsh outdoor environments.

The hybrid variant combines data (LC fibre or RJ 45) and power in one connector for easy installation and maintenance.

These high-quality, robust HARTING interfaces offer vibration protection and IP 67/65 as standard.

Power solutions and data connectors for the IP 20 environment complete the product rangeAll these features make this HARTING connector range ideal for applications such as FTTA (Fibre To The Antenna), FTTH (Fibre To The Home) or WiMAX, where reliable outdoor connectivity is needed.

For further information please contact:

Soanar

P – 03 9724 0806

0 29
Uncategorised

New industrial scale

PT has recently released the company’s brand new Red Frame Industrial scale. This strong but lightweight pallet scale is equipped with roller wheels on one end and a handle to ensure mobility around the factory floor.

According to the company, the industrial scale can save forklift drivers and pallet jack operator’s time as the pallet scale is now wheeled to the product rather then bringing the goods that needs to be weighed to the scale.

Designed to be easy to operate, the display that is supplied with the industrial scale is sealed in a colour coded protective membrane with 5 metres of cable.

Available in either 600kg, 1000kg or 3000kg capacities the weight is spread evenly over 4 load cells. With 4 locking nuts at each base the scale provides a level of accuracy to the closest 0.1, 0.3 or 0.5kg.

For more information contact:

PT Limited

P – 1800 777 866

W – www.pt-global.com

0 36
Uncategorised

Digital manufacturing software solutions

PRODUCT Lifecycle Management Australasia (PLMA) recently announced the immediate availability of Plant Simulation, a software solution from Siemens PLM, that allows users to optimise throughput, relieve bottlenecks and minimise work-in-process in factories, warehouses and logistical operations.

Plant Simulation enables users to create well-structured, hierarchical models of production facilities, lines and processes, as well as logistical operations and storage and warehousing operations. This is achieved through powerful object-oriented architecture and modeling capabilities that enable users to create and maintain even highly complex systems, including advanced control mechanisms. The simulation models take into consideration internal and external supply chains, production resources and business processes, allowing you to analyse the impact of different production variations.

Jens Schlueter, Chief Executive Officer SpedIT, states: “Plant Simulation is the best logistics simulation tool that I know on the market. Complex system behavior can be analyzed and optimized in a systematic manner. Plant Simulation easily realizes ROI in less than six months and cost savings of more than 30% in the first project.”

Dennis Colusso, Director of PLMA says, “Plant Simulation has proved to be an invaluable tool to many Siemens PLM customers in North America and Europe, in many type of industries like consumer-packaged-goods, food processing, logistics and supply chain, mining, automotive and automotive suppliers. Plant Simulation enables them to do “what if” type simulations and optimisations, on their operations before committing to a real world implementation. We feel Australian companies have much to gain in terms of increased productivity by using such a tool in order to maintain competitive advantage to address globalisation challenges.”

PLMA will be holding free seminars on Plant Simulation in Melbourne on the 24th of February, 2009 and in Sydney on the 26th of February, 2009 for more info see www.plma.com.au.

PLMA is the Master Distributor for the Siemens PLM suite of Product Lifecycle Management solutions.

For more information see: www.plma.com.au or call 1 800 303 202

0 29
Uncategorised

Indexing pry bar for tough jobs

PRECISION Specialty Tooling has released an Indexing Pry Bar which affords outstanding access and leverage for those demanding positioning jobs in the automotive, building and construction, emergency services, defence and security sectors.

In fact anywhere that a difficult to shift, free or move component or application demands the ready application of leverage.

The bar has an indexing head which will rotate and lock in position through 180 degrees, so that the point of access or purchase to gain leverage can be exactly set for the task required.

According to the company, this feature affords 14 different locking positions, enabling the bar to access tight corners or locations while the bar itself offers the option of a grooved or smooth profile again afford extra strength and grip for the required job.

The indexing pry bar comes in a range of sizes, running from 200mm through to 825mm and there is also an extendable version available where the bar itself will extend from 450mm to 725mm in the length of the handle.

For more information contact:

Precision Specialty Tooling

P – 03 9416 7077

0 27
Uncategorised

Multi gas detector

SPERIAN protection is proud to announce the launch of the Biosystems PHD6, the newest multi gas detector on the market.

Featuring 5 sensor ports, up to 6 channels of detection and 18 sensor options including electrochemical, LEL, PID and Infrared the PHD6 is suitable for just about any type of gas monitoring situation.

According to the company, with a built in datalogger as a standard feature and easy-to-navigate menus, users of the PHD6 can record atmospheric conditions for trend analysis, site evaluation or gas data management, which can be downloaded using BioTrak PC Software onto any computer.

Powerfully constructed yet easy to handle, the detector can to be positioned on a belt, or clothing, and with a vibrating alarm as standard on all PHD6 units it is ideal to use in noisy environments without compromising safety.

Constructed from an engineered polycarbonate frame with rubber overmold, the PHD6 is both tough and easy to handle when you’re in the field.

Power comes from either an interchangeable alkaline or Li-lon rechargeable battery packs with run times as long as 24 hours. What’s more, the PHD6 is also compatible with the Biosystems IQ6 Docking Station, a fully automated calibration station for data download.

Designed form the ground up, the IQ6 Express Dock is the easiest dock to use on the market with incredible processing power and flexibility.

For more information contact:

Sperian Protection

P – 1300 139 166

W – www.sperianprotection.com.au

0 37
Uncategorised

New all-in-one safety gate switch and interlock

PILZ Australia has launched the new PSENslock device that combines the functions of a safety gate monitoring switch and interlock in one compact, robust unit.

Suitable for mounting directly on 45mm extruded aluminium profiles, the device is designed for applications up to SIL3 (safety integrity level 3) in accordance with EN/IEC 62061, and Category 4 in accordance with EN 954-1.

Sealed to IP67, it can be used on a wide variety of machinery across a diverse range of industries. It has been designed to hold the gate closed by means of a long-life, maintenance-free electromagnet that achieves a holding force of 500N while drawing only 4.8W from a 24V DC supply.

Thanks to the non-mechanical locking technology, the switch/lock and actuator can tolerate a maximum horizontal and vertical misalignment of 5mm.

Proven non-contact, coded transponder technology ensures that the safety switch function is virtually impossible to manipulate, while also ensuring a long life when used on guards that are opened frequently during normal operation of the machinery.

Double-sided, high-brightness LEDs aid troubleshooting and enable the device to be mounted on left- or right-hinged guards. An M12 connector helps to make the unit quick and easy to install on the machine or to replace in the event of damage occurring.

Dimensions are 122 x 45 x 44mm for the switch/locking component and 138 x 52 x 24mm for the actuator.

It can be readily mounted on aluminium profiles for hinged guards, or Pilz can supply optional brackets for use on folding or sliding gates.

For more information contact:

Pilz Safe Automation

P – 03 9544 6300

W – www.pilz.com.au

0 49