BALDOR has launched a family of frequency inverter drives for ac motors that has the ability to reduce total cost of ownership substantially for common process automation equipment.
The drives offer a very simple user interface that provides ‘out of the box’ solutions for a large proportion of variable speed motor control applications.
They are also available with a range of environmental protection, from a standard industrial housing to a dust- and splash-proof version (IP55 or NEMA 12), and even a full wash down duty (IP66 or NEMA 4X) variant.
The latter version is unusual in this smaller power sector of the market.
The drive range includes both single-phase and three-phase versions, for motor control power requirements from 0.37 to 7.5kW (0.5 to 10hp). A Modbus RTU communications port is provided as standard.
VS1MX drives have been designed to be as simple as possible to apply. Every version can be supplied ready to use, with an integral EMC filter. Simple front panel mounted user interfaces allow any of the drives to be made operational in minutes.
Although the drives come with a control language of 45 parameters – supporting the programming of quite complex applications – the first menu level presents a subset that allows the most common applications to be set up in a few minutes.
These commands include motor voltage/current/frequency/speed, maximum/minimum speed, preset speed and acceleration/deceleration ramp.
Configuration programs can also be stored on a simple external ‘memory stick’ type device, and reloaded as required. A remote keypad may also be fitted to the drives, to simplify the layout and construction of automation.
The standard industrial version of the drive (protected to IP20) is DIN-rail mounting.
The two higher-specification versions are panel mounting, and come with a built-in isolation mechanism that ensures that operators can switch the system to a safe state for maintenance purposes, or for dealing with day-to-day issues such as clearing a jam.
The dust- and splash-proof version can also be ordered with a front panel mounted potentiometer, to provide a simple speed control mechanism for applications such as conveyors.
There are eight choices of drive available for single-phase applications, spanning motor output ratings from 0.37 to 2.2kW (0.5 to 2.9hp), plus a further 13 choices of three-phase versions for motor outputs from 0.37 to 7.5kW (0.5 to 10hp).
All the drives also incorporate built-in analogue and digital I/O and an NOC relay output, providing users with facilities to create custom remote control panels, and to integrate the drive into a process.
The drives’ command parameters have been specially selected to provide a simple upgrade path for users of previous generations of low-power frequency inverters from Baldor.
Australian Baldor 02 9674 5455
www.baldor.com.au