Safety hinge switch

THE SHS3 safety switch from Bernstein implements numerous new user friendly features. For instance, the switching point of the SHS3 is freely settable in an angle range of 270°.

THE SHS3 safety switch from Bernstein implements numerous new user friendly features. For instance, the switching point of the SHS3 is freely settable in an angle range of 270°.

The most important innovation of the SHS3 is the opportunity to re-adjust the switching point even after it has been set.

Another novelty is the modular structure: using the same hinge, it is now possible to build a system with a right or left end stop. In addition, both front installation and interior installation between the profiles can be realised.

But regardless of the type of installation, the switching point can be freely set over the entire angle range.

The SHS3 has much to offer in regards to switching technology. Being equipped with two forced opening safety contacts and a signal contact, it allows for a layout up to control category 4 according to EN 945-1 in a redundant system.

Bernstein’s new SHS3 has been developed as a full stainless steel, full load hinge and has a protection of IP67.

www.balluff-leuze.com.au