2024 STEELMASTER AML-3 - 1550MM HVAC DUCT LINE 1550mm Wide
Finance Estimate
From $458.89*
per week
From 8.09% p.a. #
comparison rate
Interest rate from 7.90% p.a.,
5 year term, 20% deposit.
Get my Online Quote »
* # View disclaimer
* This weekly repayment estimate is provided by Stratton Finance Pty Ltd (ABN 63 070 636 903, Australian Credit
Licence no. 364340) ("Stratton"). Stratton is a finance broker.
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 8.09% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 8.09% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
.JPG)
.jpg)
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
.jpg)
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
.jpg)
.JPG)
.JPG)
.JPG)
.jpg)
.jpg)
Finance Estimate
From $458.89*
per week
From 8.09% p.a. #
comparison rate
Interest rate from 7.90% p.a.,
5 year term, 20% deposit.
Get my Online Quote »
* # View disclaimer
* This weekly repayment estimate is provided by Stratton Finance Pty Ltd (ABN 63 070 636 903, Australian Credit
Licence no. 364340) ("Stratton"). Stratton is a finance broker.
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 8.09% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 8.09% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
Contact Seller
Features
| Title | 2024 STEELMASTER AML-3 - 1550MM HVAC DUCT LINE 1550mm Wide |
| Type | Engineering - Fabrication |
| Sub Type | Sheetmetal Machines |
| Class | HVAC Machines |
| Make | STEELMASTER |
| Model | AML-3 - 1550MM HVAC DUCT LINE |
| Series | 1550mm Wide |
| Year | 2024 |
| Sale Price | 88850+ $97,735 + GST |
| Listing Type | New |
| Stock Number | 20-0618 |
| RefCode | TA961956 |
Description
Description,
Price is subject to GST.
Our Duct production line III comprises of a twin decoiler, leveller grooving unit, V and notching unit, cutting unit, bending unit composition. The standard configuration the V and notching unit make for TDF flange duct, thereinto the notching unit also can be used to produce TDC flange. Bending unit can be made with the Pittsburgh match the right angle, also can be sheet metal bending into a "" or "L" type. Greatly improve the utilization of the plate, reduce labour intensity and reduce labour.
The production line electrical control part adopts full servo control; the control system has a closed-loop feedback system, Accuracy and stability were obvious improved. The maximum operating speed of 16 m / min.
Length tolerance is ±0.5mm; diagonal tolerance is ± 0.8mm. The system can meet the each shift8 hours production capacity of 1000m2 duct.
Technical Snap Shot.
Up to 1550mm wide material
Panasonic Servo PLC Control
Levelling, Notching, Shearing & Folding
Thickness: 0.4-1.0mm
Shearing tolerance of ±0.5mm
Hydraulic folding tolerance of ±0.5mm
0-16m/min feeding speed, fast acting back gauge
Dimensions: 9800mm x 1800mm x 1400mm x 4800Kg
Largest EX STOCK range of HVAC & Ductwork Fabrication Direct to The Industry
Steelmaster Industrial offer the largest EX STOCK range of HVAC & Ductwork Fabrication Direct to The Industry
Our products include, complete HVAC auto metalworking processing lines, Lockseamer, TDC & TDF roll formers, TDF & TDC auto corner inserters, HVAC seam closers, Jenny & Swage Machines, curving rollers, TDF folders, Metalworking Guillotines, Metalworking Panbrake Folders, CNC HVAC Plasma cutting machines, HVAC Collar roller & Edge Notcher, Rib & Bead Rolling Machines, Snap Lock Machines and so much more
All our HVAC metalworking machines are pre commissioned prior to delivery and we offer qualified technicians for onsite set up and training if required.
We can also offer support for leading brands as Lockformer, Pittsburgh, Vulcan CNC Plasma, RAS HVAC Machinery and more.
If you cant find what youre looking for call us on or look online www.steelmastermachinery.com.au
Servicing the Industrial Metalworking Industry since 1997
We have many more items available than listed here.
Asset offer a wide variety of metalworking machinery, spare parts and accessories to suit our range
Industries service range from Engineering, Metalworking Fabrication & Sheetmetal Shops Australia Wide.
Also offering national delivery on metalworking bandsaw & cold saw blades, Punch & Shear Tooling, Pressbrake Tooling, Industrial Conveyors and much more.
We can also offer experienced service technicians in house or onsite to assist Please contact us for further information.
Visit our website, or call us with your requirements
Tell us what you are after, chances are we have it already.
For More information on our machine, go to or contact a Steelmaster industrial Rep
MAKE YOUR NEXT PURCHASE AN "ASSET" TO YOUR COMPANY!
Please contact us for more information.
## STEELMASTER INDUSTRIAL OFFER A COMPLETE RANGE OF NEW & USED METALWORKING MACHINERY FOR SALE AUSTRALIA WIDE ##
Price is subject to GST.
Our Duct production line III comprises of a twin decoiler, leveller grooving unit, V and notching unit, cutting unit, bending unit composition. The standard configuration the V and notching unit make for TDF flange duct, thereinto the notching unit also can be used to produce TDC flange. Bending unit can be made with the Pittsburgh match the right angle, also can be sheet metal bending into a "" or "L" type. Greatly improve the utilization of the plate, reduce labour intensity and reduce labour.
The production line electrical control part adopts full servo control; the control system has a closed-loop feedback system, Accuracy and stability were obvious improved. The maximum operating speed of 16 m / min.
Length tolerance is ±0.5mm; diagonal tolerance is ± 0.8mm. The system can meet the each shift8 hours production capacity of 1000m2 duct.
Technical Snap Shot.
Up to 1550mm wide material
Panasonic Servo PLC Control
Levelling, Notching, Shearing & Folding
Thickness: 0.4-1.0mm
Shearing tolerance of ±0.5mm
Hydraulic folding tolerance of ±0.5mm
0-16m/min feeding speed, fast acting back gauge
Dimensions: 9800mm x 1800mm x 1400mm x 4800Kg
Largest EX STOCK range of HVAC & Ductwork Fabrication Direct to The Industry
Steelmaster Industrial offer the largest EX STOCK range of HVAC & Ductwork Fabrication Direct to The Industry
Our products include, complete HVAC auto metalworking processing lines, Lockseamer, TDC & TDF roll formers, TDF & TDC auto corner inserters, HVAC seam closers, Jenny & Swage Machines, curving rollers, TDF folders, Metalworking Guillotines, Metalworking Panbrake Folders, CNC HVAC Plasma cutting machines, HVAC Collar roller & Edge Notcher, Rib & Bead Rolling Machines, Snap Lock Machines and so much more
All our HVAC metalworking machines are pre commissioned prior to delivery and we offer qualified technicians for onsite set up and training if required.
We can also offer support for leading brands as Lockformer, Pittsburgh, Vulcan CNC Plasma, RAS HVAC Machinery and more.
If you cant find what youre looking for call us on or look online www.steelmastermachinery.com.au
Servicing the Industrial Metalworking Industry since 1997
We have many more items available than listed here.
Asset offer a wide variety of metalworking machinery, spare parts and accessories to suit our range
Industries service range from Engineering, Metalworking Fabrication & Sheetmetal Shops Australia Wide.
Also offering national delivery on metalworking bandsaw & cold saw blades, Punch & Shear Tooling, Pressbrake Tooling, Industrial Conveyors and much more.
We can also offer experienced service technicians in house or onsite to assist Please contact us for further information.
Visit our website, or call us with your requirements
Tell us what you are after, chances are we have it already.
For More information on our machine, go to or contact a Steelmaster industrial Rep
MAKE YOUR NEXT PURCHASE AN "ASSET" TO YOUR COMPANY!
Please contact us for more information.
## STEELMASTER INDUSTRIAL OFFER A COMPLETE RANGE OF NEW & USED METALWORKING MACHINERY FOR SALE AUSTRALIA WIDE ##
Related Listings
View More7
$700
SAHINLER IK 1.2
- » Listing Type: Used
- » Class: Jennys and Swaging
Bayswater North, VIC
Dealer's Other Listings
View MorePremium Ad
19
.jpg)
$9,345
2024 STEELMASTER SM-L16N 6 Profiles in 1 Machine - 1.6mm x 415Volt
- » Listing Type: New
- » Class: Lockseamer
Dandenong South, VIC
16
.JPG)
$14,135
2024 STEELMASTER CPF 2500-1.2 AIR OPERATED 2500MM TDF FOLDER. TDF Duct Folder.
- » Listing Type: New
- » Class: HVAC Machines
Dandenong South, VIC
30
.JPG)
POA
2020 STEELMASTER HVAC DUCT MANUFACTURING LINE 6. MODEL: SM-CAL6-1.2-1600 HVAC Complete Auto Duct Line
- » Listing Type: New
- » Class: HVAC Machines
Dandenong South, VIC
25
$31,735
2024 STEELMASTER INDUSTRIAL MODEL:TDF 1.6, 16 STATION, 35MM FLANGE, Twin Station
- » Listing Type: New
- » Class: HVAC Machines
Dandenong South, VIC