HAFCO METALMASTER CS-315D
Finance Estimate
From $17.52*
per week
From 12.69% p.a. #
comparison rate
Interest rate from 7.90% p.a.,
5 year term, 20% deposit.
Get my Online Quote »
* # View disclaimer
* This weekly repayment estimate is provided by Stratton Finance Pty Ltd (ABN 63 070 636 903, Australian Credit
Licence no. 364340) ("Stratton"). Stratton is a finance broker.
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 12.69% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 12.69% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
Finance Estimate
From $17.52*
per week
From 12.69% p.a. #
comparison rate
Interest rate from 7.90% p.a.,
5 year term, 20% deposit.
Get my Online Quote »
* # View disclaimer
* This weekly repayment estimate is provided by Stratton Finance Pty Ltd (ABN 63 070 636 903, Australian Credit
Licence no. 364340) ("Stratton"). Stratton is a finance broker.
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 12.69% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 12.69% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
Contact Seller
Features
| Title | HAFCO METALMASTER CS-315D |
| Type | Engineering - Fabrication |
| Sub Type | Cutting Equipment |
| Class | Cold Saw |
| Make | HAFCO METALMASTER |
| Model | CS-315D |
| Sale Price | $2,990 GST Exclusive |
| Listing Type | New |
| Stock Number | 14281 |
| RefCode | TA1266972 |
Description
CS-315D Cold Saw, Includes Stand 110 x 70mm Rectangle Capacity ??315mm Blade, Dual Speed 22 / 44rpm
HAFCO-METALMASTER CS-315D Cold Saw, Includes Stand 110 x 70mm Rectangle Capacity ??315mm Blade, Dual Speed 22 / 44rpm
CALL NOW AND DO A DEAL! ADD THIS ASSET TO YOUR WORKSHOP
WE OFFER MACHINERY SOLUTIONS AT AFFORDABLE PRICES.
Order Code: S828
Manufactured in Taiwan
The Hafco MetalMaster manual cold saw consists of a 315mm circular saw blade that runs at a relatively slow speed in conjunction with a coolant system. These cold saws are designed to cut at 90??, or mitre up to 45?? in either left or right side of the material simply by releasing the lever located at front of machine. Each machine comes standard with a very heavy and strong cast iron frame base with a cast dual pivot saw head supported by an industrial swivel base system, which makes a MetalMaster cold saw one of the most rugged machines on the market.
The MetalMaster manual cold saw head is well balanced and uses a long actuating handle giving the operator greater leverage and control to guide the saw blade through the work piece of tubing or pipe etc., with ease and utilises a quality head retraction system for returning the cold saw head to the start position. The vice clamps the work piece on both sides of a cut, which extends blade life because the cut off does not drop into the blade.
Features:
Rugged cast iron construction offers years of accurate cutting
Lock at any angle between -45?? or +45?? mitre in both directions via locking lever
Degree markings engraved onto swivelling base for quick and accurate mitre cutting
Dual material clamp system providing burr free cuts on both pieces of material
Quick action vice clamp lever designed to increase production
Built in blade coolant pump system with flow control valve
Oil sight glass located on right side of the gearbox so operator can maintain correct lubrication levels according to specifications provided
Dead man trigger switch located on cutting handle provides operator safety on/off power control
Automatic retract safety blade guard covers blade when returned to home position
Spring assisted head return provides a even balance during cutting operation and reduces operator fatigue
HSS cutting blade is included for general types of material and thickness
Includes:
- Blade
- Stand
- Coolant system
- Material length stop
Specifications:
ORDER CODE: S828
MODEL: CS-315D
Cutting Head Action: Manual
Operation Type: Swivel - Dual Mitre
Round Capacity @ 90?? / 45?? (mm): 100 / 90
Square Capacity @ 90?? / 45?? (mm): 82 / 75
Rectangle Capacity @ 90?? / 45?? (WxH) (mm): 110 x 70 / 85 x 70
Blade Size - Diametre. x Bore (??) (mm): 315 x 32
Vice Clamping Fixture: Manual
Coolant System: Yes
Table Working Height (with Stand) (mm): 980
Blade Speed (rpm): 22 / 44
Motor Power (kW / hp): 1.5 / 2
Voltage / Amperage (V / amp): 415
Nett Weight (kg): 175
To Purchase Online Please Visit The Machineryhouse Website & Search For 'S828'
Visit us in-store at:
Sydney - Unit 1, 2 Windsor Road, Northmead NSW 2152
Melbourne - 4 Abbotts Road, Dandenong South VIC 3175
Brisbane - 625 Boundary Rd, Coopers Plains QLD 4108
Perth - 11 Valentine Street, Kewdale WA 6105
Adelaide - Unit 11/20 Cheltenham Parade, Woodville SA 5011
HAFCO-METALMASTER CS-315D Cold Saw, Includes Stand 110 x 70mm Rectangle Capacity ??315mm Blade, Dual Speed 22 / 44rpm
CALL NOW AND DO A DEAL! ADD THIS ASSET TO YOUR WORKSHOP
WE OFFER MACHINERY SOLUTIONS AT AFFORDABLE PRICES.
Order Code: S828
Manufactured in Taiwan
The Hafco MetalMaster manual cold saw consists of a 315mm circular saw blade that runs at a relatively slow speed in conjunction with a coolant system. These cold saws are designed to cut at 90??, or mitre up to 45?? in either left or right side of the material simply by releasing the lever located at front of machine. Each machine comes standard with a very heavy and strong cast iron frame base with a cast dual pivot saw head supported by an industrial swivel base system, which makes a MetalMaster cold saw one of the most rugged machines on the market.
The MetalMaster manual cold saw head is well balanced and uses a long actuating handle giving the operator greater leverage and control to guide the saw blade through the work piece of tubing or pipe etc., with ease and utilises a quality head retraction system for returning the cold saw head to the start position. The vice clamps the work piece on both sides of a cut, which extends blade life because the cut off does not drop into the blade.
Features:
Rugged cast iron construction offers years of accurate cutting
Lock at any angle between -45?? or +45?? mitre in both directions via locking lever
Degree markings engraved onto swivelling base for quick and accurate mitre cutting
Dual material clamp system providing burr free cuts on both pieces of material
Quick action vice clamp lever designed to increase production
Built in blade coolant pump system with flow control valve
Oil sight glass located on right side of the gearbox so operator can maintain correct lubrication levels according to specifications provided
Dead man trigger switch located on cutting handle provides operator safety on/off power control
Automatic retract safety blade guard covers blade when returned to home position
Spring assisted head return provides a even balance during cutting operation and reduces operator fatigue
HSS cutting blade is included for general types of material and thickness
Includes:
- Blade
- Stand
- Coolant system
- Material length stop
Specifications:
ORDER CODE: S828
MODEL: CS-315D
Cutting Head Action: Manual
Operation Type: Swivel - Dual Mitre
Round Capacity @ 90?? / 45?? (mm): 100 / 90
Square Capacity @ 90?? / 45?? (mm): 82 / 75
Rectangle Capacity @ 90?? / 45?? (WxH) (mm): 110 x 70 / 85 x 70
Blade Size - Diametre. x Bore (??) (mm): 315 x 32
Vice Clamping Fixture: Manual
Coolant System: Yes
Table Working Height (with Stand) (mm): 980
Blade Speed (rpm): 22 / 44
Motor Power (kW / hp): 1.5 / 2
Voltage / Amperage (V / amp): 415
Nett Weight (kg): 175
To Purchase Online Please Visit The Machineryhouse Website & Search For 'S828'
Visit us in-store at:
Sydney - Unit 1, 2 Windsor Road, Northmead NSW 2152
Melbourne - 4 Abbotts Road, Dandenong South VIC 3175
Brisbane - 625 Boundary Rd, Coopers Plains QLD 4108
Perth - 11 Valentine Street, Kewdale WA 6105
Adelaide - Unit 11/20 Cheltenham Parade, Woodville SA 5011
Related Listings
View MorePremium Ad
10
$4,675
HAFCO METALMASTER BS-10AS
- » Listing Type: Used
- » Class: Band Saw
Boolaroo, NSW
20
$5,630
HAFCO METALMASTER EB-330DSC
- » Listing Type: New
- » Class: Band Saw
Stores Australia Wide
11
$990
HAFCO METALMASTER BS-6V
- » Listing Type: New
- » Class: Band Saw
Stores Australia Wide
20
$3,270
HAFCO METALMASTER ALU-350A
- » Listing Type: New
- » Class: Circular Saw
Stores Australia Wide
Dealer's Other Listings
View More18
$9,250
HAFCO METALMASTER EB-351DSA
- » Listing Type: New
- » Class: Band Saw
Stores Australia Wide
20
$9,990
HAFCO METALMASTER BS-13DS
- » Listing Type: New
- » Class: Band Saw
Stores Australia Wide
20
$5,590
HAFCO METALMASTER BS 10LS
- » Listing Type: New
- » Class: Band Saw
Stores Australia Wide
20
$3,450
HAFCO METALMASTER BS-916A
- » Listing Type: New
- » Class: Band Saw
Stores Australia Wide