✨ New: Multi-Enquiry Feature

Submit your email enquiry, then send it to similar listings with just a click!


Contact Seller

Phone: ** **** *759
✨ New: Multi-Enquiry Feature

Submit your email enquiry, then send it to similar listings with just a click!

Email Advertiser:

For security reasons, do not select "Remember my details" if you are using a shared computer.
View our privacy policy, collection notice and terms and conditions to understand how we use your personal information.


Shaw Machinery

12 Filmer St

Clontarf, QLD

Shaw Machinery Visit website


Price $29,645
Listing Type New
Stock Number B035A
RefCode TA515178


HAFCO METALMASTER Double Mitre, Swivel Head Metal Cutting Bandsaw BS-461AS


Order Code: B035A
BS-461AS - Dual Mitre, Swivel Head Metal Cutting Band Saw (415V)
600 x 440mm (W x H) Rectangle

Manufactured in Taiwan

The BS-461AS is a metal cutting dual mitre swivel head, semi-automatic band saw capable of cutting a large 600x 440mm rectangle material and is a great semi-automatic band saw for cutting at 90 degrees. This saw can also cut up to 460mm round material, meaning you get more value for your investment than with any other saw on the market. Quick release lever allows the operator to change the mitre angle in seconds. This gear driven metal cutting band saw we offer has a variable speed, dual mitre cutting head, and a hydraulic controlled descent device for perfect feeds and longer blade life. The vice uses a full stroke hydraulic clamping system and after the cut is complete the blade stops, the vice opens and the head lifts to the start position for the next piece to be cut, the start position is adjustable via an adjustable micro switch at rear of machine to the desired height. The Hafco MetalMaster band saws are constructed of a heavy cast iron saw head and base and the blades are guided via a tungsten carbide insert offering rigidity and accuracy. This band saw has a powerful coolant system and a blade tensioning device that shuts down the machine if the blade breaks.

The BS-461AS metal band saw has a hydraulic descent control device for the down feed for larger production runs that increases blade life and reduces operator fatigue. This series of band saw requires 415V, three phase, 50 hertz. The BS-461AS semi automatic horizontal band saw has a dual mitre saw head that can cut from 0º to 60º degrees. This series of horizontal band saws come standard with a variable speed drive allowing the operator to fine tune the blade speed from 26 - 80 M/min. The BS-461AS metal cutting saw series requires a 41mm wide saw blade by 1.3mm thickness, making this series a very precise mitre saw. These band saws offer more cutting capacity in a variable speed mitre saw than any other saw on the market, for the investment representing quality band saws at an exceptional value.

600 x 440mm (W x H) rectangular capacity
Swivel head dual mitre to 45º left & 60º right for easy angle cutting without moving material
Semi-automatic operation, machine returns to open height position after finishing the cutting process
Automatic 2 speed full stroke hydraulic clamping vice
Hydraulic operated system raising and lowering the cutting beam
Adjustable hydraulic feed cutting rate for multiple applications
Blade breakage sensor fitted that automatically shuts machine off
Built-in coolant system for maximum cutting efficiency
Variable blade speed system enabling 26-80mpm cutting speeds
Limit switch stops machine and raises cutting beam when cut is complete
Swivelling electric control panel mounted on base for quick operation
Industrial-duty gearbox driven by a 3.75kW / 5hp 415V motor
Combination roller bearing & carbide blade guides
Fabricated metal frame with heavy duty base
Adjustable blade roller guides provides accurate cutting
Adjustable length stop for repetition cutting
Motorised wire wheel brush to clean swarf from blade

Coolant system
Length stop

Model: BS-461AS
Cutting Head Beam: Semi-Automatic
Operation Type: Swivel Head - Dual Mitre
Round @ 90º: 460mm
Round @ 45º: 460mm
Round @ 60º: 330mm
Square @ 90º: 460mm
Square @ 45º: 460mm
Square @ 60º: 330mm
Rectangle (W x H) @ 90º: 600 x 440mm
Rectangle (W x H) @ 45º: 460 x 360mm
Rectangle (W x H) @ 60º: 30 x 230mm
Cutting Beam Return: Automatic-Hydraulic
Vice Clamping Fixture: Automatic-Hydraulic
Coolant System: Yes
Table Working Height: 880mm
Blade Steps / Speeds: Variable 26-80 M/min
Blade Size (L x W x T): 5330 x 41 x 1.3mm
Motor Power: 3.75kW / 5hp
Voltage: 415V
Weight (nett): 1560kg

all prices and specifications are subject to change