GENTECH 6.8 KVA WELDER DIESEL GENERATOR (ELECTRIC START)

Yanmar diesel engine with electric start. Featuring 5.4 litre fuel tank, giving 3.3 hours of operation at 80% load.

This generator is the workers choice, featuring 6.8 kVA of real grunt and up to 160 Amps of welding power for exceptional performance to keep you working until the job is done.

• please note welding leads are not included

Specifications:

Power Rating: 6.8 kVA
Model Rating 0.8pf @ 50Hz: 6.8 kVA
Alternator Rating: 7 kVA
Engine Model: Yanmar L100N5
Phase: 1-Phase
Starting System: Electric
Fuel Tank Capacity: 5.4 L
Noise Level @ 7m: 80 dBA
Outlets: Double GPO 15 Amps
Welder: 160 Amps
Duty Cycle: 60%
Volts: 230 V
Approx. Fuel Consumption @ 80% Load: 1.65 L/hr
Operation Hours @ 80% Load: 3.3 hrs
Fuel Type: Diesel
Diam.: 810 x 550 x 560 (L x W x H)
Weight: 100.5 kg

Optional Extras:

80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.

80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.

80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.

10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.

WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.

10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.

10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets

10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.

10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.

R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.

80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.

Solar Panel Kit - To suit electric start generators to keep your batteries charged.

10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.


Generator Dust Covers:

COVER-SML - Cover to suit generators up to 3.6kVA

COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.


Battery Chargers:

RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)

PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.



All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!

Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.